8
fitting the safety guard
Turn the trimmer upside down. Place the blade guard (4)
1.
over the cutting head on your grass trimmer while aligning
both the ridges of the blade guard (4) with the grass
trimmer housing (Fig. 1).
Push into position and secure with 2 Phillips head screws
2.
supplied through the guard (4) into grass trimmer housing.
extension cord retainer
To avoid detaching the extension cord always check that it is
attached to the cord retainer (3) before operating the grass trimmer.
Make a loop with the extension cord and push it through
1.
the square hole under the grip of the On/Off switch (2).
Place the end of the loop around the cord retainer (3) and
2.
ensure it is pulled firmly enough to prevent it from coming loose whilst operating the
trimmer.
Connect the extension cord socket to the grass trimmer cord plug.
3.
Switching on/off
For your safety this Grass Trimmer is designed with a safety lock off mechanism to prevent
accidental starting. If you only squeeze the On/Off switch (2) the Grass Trimmer will not start.
To switch ON, depress and hold the lock-off button (7)
1.
whilst squeezing the On/Off switch (2) (Fig. 3). Once
started you can release the lock-off
button (7)
To switch OFF simply release the On/Off switch (2).
2.
aSSemBly
WaRninG!
Before assembly, make sure that the grass trimmer is switched off and
unplugged..
WaRninG!
Never use the grass trimmer unless the safety guard is properly fitted &
secured.
WaRninG!
The grass trimmer may run for a few seconds after it has been switched
off. Let the motor come to a complete standstill before setting the tool down.
opeRation
Fig. 1
Fig. 2
3
Fig. 3
