background image

4

Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for future reference.
Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for future reference                 

The electric motor has been designed for 230V and 240V only. Always check that the power 

supply corresponds to the voltage on the rating plate.

note:

 The supply of 230V and 240V on Ozito tools are interchangeable for Australia and 

New Zealand.

  This tool is double insulated in accordance with AS/NZS 60335-1; therefore no 

earth wire is required.

If the supply cord is damaged, it must be replaced by a qualified electrician or a power tool 

repairer in order to avoid a hazard.
If operating a power tool in a damp location is unavoidable use a residual current device 

(RCD) protected supply. Use of an RCD reduces the risk of electric shock. 

note:

 Double insulation does not take the place of normal safety precautions when 

operating this tool. The insulation system is for added protection against injury resulting 

from a possible electrical insulation failure within the tool.

using an extension lead

Always use an approved extension lead suitable for the power input of this tool. Before use, 

inspect the extension lead for signs of damage, wear and ageing. Replace the extension 

lead if damaged or defective. When using an extension lead on a reel, always unwind the 

lead completely. Use of an extension lead not suitable for the power input of the tool or 

which is damaged or defective may result in a risk of fire and electric shock.
Type of extension cords to be used shall be at least ‘ordinary duty sheathed cords’ having 

minimum conductor cross sectional area of 0.75 mm².

intRoduction

Congratulations on purchasing an Ozito Grass Trimmer. We aim to 

provide quality tools at an affordable price. We hope you will enjoy 

using this trimmer for many years.
Your Ozito Grass Trimmer GTR-250 has been designed for 

trimming lawn edges and grass around shrubs and trees. It is 

intended for DIY (Do It Yourself) use only. It is not built

for continuous daily use in a trade or professional capacity.

       electRical Safety

WaRninG!

 When using mains-powered equipment, basic safety precautions, 

including the following, should always be followed to reduce risk of fire, electric 

shock, personal injury and material damage.

Summary of Contents for GTR-250













Reviews: