10
maintenance
When not in use, the tool should be stored in a dry, frost-free location, out of reach of
•
children.
Lubrication is not required as the tool has sealed bearings.
•
note:
Ozito Industries will not be responsible for any damage or injuries caused by repair of
the tool by an unauthorised person or by mishandling of the tool.
fitting and replacing blades
The trimmer has two removable plastic blades that can be quickly and easily replaced.
Blades can be purchased in packs of 20 (Ozito part number ACCPCB-20) and are available
from your local Bunnings Warehouse.
To fit a blade, position the hole in the blade (5) over the
1.
blade attachment knob (8) then pull the blade outwards
to lock it into position (Fig. 5).
To remove a blade push the blade (5) toward the centre
2.
of the trimmer and lift it off the blade attachment knob (8)
(Fig. 6).
WaRninG!
Before making this change, make sure that the grass trimmer is switched
OFF and unplugged. Wait until the blade has stopped before attempting to remove
the blade. Never fit metal blades. Only fit blades recommended by the manufacturer.
Fig. 6
Fig. 5
8
