Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
RUN
BRAKE IS OFF
BRAKE IS ON
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
The cord retainer is used to “anchor” an extension lead (not included)
when it is connected to the power cord of the tool. It prevents the
extension lead from being accidentally disconnected from the chainsaw’s
power cord or shaken loose during use. Only use Heavy Duty extension
lead suitable for outdoor use with electric garden tools, no longer than 25
meters.
1. Make a loop in the end of the
extension lead and pass the loop
though the hole in the handle.
2. Hook the loop over the cord
retainer. Pull the extension lead
to secure it in position over the
cord retainer.
3. Connect the extension lead to
the power cord of the tool.
Route the power cord and
extension lead away from the
work area to prevent contact
with the chainsaw.
Note:
Always use an approved extension lead suitable for the power input
of the tool and outdoor use.
4. CORD RETAINER
5. CHAIN BRAKE
OPERATION
WARNING!:
CHECK THE OPERATION OF THE CHAIN
BRAKE ON A REGULAR BASIS. NEVER USE THE
CHAINSAW IF THE CHAIN BRAKE IS NOT WORKING
PROPERLY.
The chain brake operates
automatically in the event of
kick back.
The chainsaw is fitted with a
hand guard/chain brake which,
when operated brings the
chain to a stop within a tenth
of a second.
The chain brake can be
operated manually by pushing
it forward or automatically as a
result of kickback.
Kick back occurs if the chain
catches on the wood being cut and the chainsaw pushes back suddenly.
In the event of kick back, your hand (which is on the front handle during
operation) jerks forward causing the back on your hand to push the guard
forward, engaging the chain brake and quickly stopping the chain.