Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
+
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
+
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
+
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
+
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
+
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
+
A
B
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
Electric Chainsaw
356mm Bar
356mm Bar
1900W
Electric Chainsaw
356mm Bar
356mm Bar
1900W
3/8” LP
52
+
1. Power cord
2. Cord retainer
3. Oil level window
4. Oil tank cap
5. Side cover
6. Chain tensioning dial
7. Chain brake
8. Bucking spikes
9. Side cover lock
10. Guide bar
11. Chain
12. Lock-off switch
13. On/Off trigger
14 Rear handle
15. Sprocket
16. Front handle
17. Chain tensioning pin
ELECTRIC CHAINSAW
ACCESSORIES
KNOW YOUR PRODUCT
1. GUIDE BAR & CHAIN
ASSEMBLY
1
2
3
4
5
6
7
8
12
10
11
WARNING!
ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Fitting the Chain & Bar
1
. Fully unscrew the side cover lock
by turning it in an anti-clockwise
direction.
2. Remove the side cover.
3. Fit the chain over the guide bar,
making sure that the cutters are
facing in the direction of rotation.
4. Place the guide bar and chain
in position, ensuring that the
chain is around sprocket (A).
Also ensure that the chain
tensioning pin (B) fits into the
guide bar. If it does not fit, it
can be adjusted slightly with
the chain tensioning dial. The
chain must not slip off the bar
when you do this.
15
16
13
18. Guide bar cover
WARNING!
ALWAYS WEAR HEAVY GLOVES WHEN
HANDLING THE CHAIN AS IT IS VERY SHARP AND CAN
CUT YOU WHEN IT IS NOT MOVING.
5. Pull the guide bar forward until
the chain is closely seated.
Make sure that all the drive
links are in the groove of the guide bar.
6. Place the side cover at a slight angle at the
beginning of assembly, then secure with the
side cover lock, turning several times for the
thread to engage.
Note:
Do not fully tighten the side cover lock
until after adjusting the chain tension.
14
18
9
17
