Double insulated
Wear hearing & eye protection
Diameter
Wear non-slip heavy duty gloves
Warning
Regulatory Compliance Mark
(RCM)
Disconnect and discontinue use
should the power cord be
damaged.
V
Volts
Hz
W
Hertz
~
n
0
/min
Alternating Current
Watts
No load speed
Revolutions or reciprocations
per minute
Read Instruction Manual
Ø
108
Beware of kickback
Do not expose to rain
Always hold the chainsaw with
both hands
Sound power level
IMPORTANT!
When placing the chain on the guide bar,
ensure the chain direction is the same as the image on the
guide bar
Chain drive links 52
52
DESCRIPTION OF SYMBOLS
Power tools that are no longer usable should not
be disposed of with household waste but in an
environmentally friendly way. Please recycle where
facilities exist. Check with your local council authority for
recycling advice.
Recycling packaging reduces the need for landfill and
raw materials. Reuse of recycled material decreases
pollution in the environment. Please recycle packaging
where facilities exist. Check with your local council
authority for recycling advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk at your
local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
Ozito Industries will not be responsible for any damage or injuries caused by
repair of the tool by an unauthorised person or mishandling or mistreatment
of the tool. This tool is designed for Domestic Home Use only. Use in
commercial or industrial environments will void the warranty.
• Keep the handles free of grease and oil so that you can maintain a firm
grip.
• Clean the device as required with a damp cloth and, if necessary, mild
washing up liquid.
• If the chainsaw is not to be used for an extended period of time then you
should remove the chain bar oil from the tank. Briefly immerse the chain
and the guide bar in an oil bath and then wrap them in oil paper and
store in guide bar cover.
Cleaning & Storing
The chain can be purchased through Ozito spare parts or from your local
Bunnings Warehouse. The correct chain can be purchased by matching
the pitch, gauge and number of links as shown below:
Chain Replacement
1
2
outward
stroke
30º
2
9.53
mm
(3/8”)
1.3
mm (
.050”)
52
Links
Gauge
TROUBLESHOOTING
PROBLEM
CAUSE
REMEDY
Chainsaw will not
work.
Chain brake
engaged
Disengage brake
No power supply
Try alternative
source of electrical
power
Defective mains
outlet
Try alternative
source of electrical
power
Power extension
cord damaged
Check the cable and
replace if required
Chainsaw operates
intermittently
Power cable
damaged
Replace power cable
On/Off switch
defective
Replace switch
Dry chain
No oil in oil tank
Fill oil tank with
chain bar oil
Oil tank cap breather
blocked
Clean oil tank cap
Oil outlet blocked
Clear oil outlet
Chain or guide rail
hot
No oil in oil tank
Fill oil tank with
chain bar oil
Oil tank cap breather
blocked
Clean oil tank cap
Oil outlet blocked
Clear oil outlet
Blunt chain
Sharpen or replace
chain
Wont cut
Blunt chain
Sharpen or replace
chain
Chain on backwards
(chain teeth pointing
in the wrong
direction)
Remove chain and
reinstall with the
teeth facing in the
correct direction
Worn chain
Replace the chain
Chainsaw vibrating
or not cutting
properly
Chain tension too
loose
Adjust chain to
correct tension
Blunt chain
Sharpen or replace
chain
Worn chain
Replace the chain
Chain on backwards
(chain teeth pointing
in the wrong
direction).
Remove chain and
reinstall with the
teeth facing in the
correct direction
MAINTENANCE (cont.)
