!!
7
21. Do not perform layout assembly or setup work on the table while the drill press
is in operation.
22. Do not exceed the rpm stated on the bit or accessory. See the instructions that
come with the accessory.
23. When drilling large diameter holes, clamp the workpiece firmly to the table.
Otherwise, the bit may grab and spin the workpiece at high speed. Do not use
fly cutters or multiple-part cutters, as they can come apart or become
unbalanced in use.
24. Make sure the spindle has come to a complete stop before touching
the workpiece.
25. To avoid injury from accidental starting, always turn the switch off and unplug
the drill press before installing or removing any accessory attachment or
making any adjustment.
26. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
27. Children should be supervised to ensure that they do not play with
the appliance.
28. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
CAUTION:
Do not expose to rain or use in damp locations.
WARNING!
For your own safety read instruction manual before operating
drill press. Wear eye protection, do not wear gloves, necktie or loose
clothing, clamp workpiece or brace against column to prevent rotation, use
recommended speed for drill accessory and workpiece material.
DRILL PRESS SAFETY WARNINGS
!!
Summary of Contents for DP-350
Page 1: ......
