Connecting to
the discharge outlet
1
. Remove the plastic protection cover
from the discharge outlet.
2. Wrap the discharge outlet with Teflon
tape.
3. Insert a 1” female threaded
adaptor (not included).
4. Securely attach the output
hose or pipe (not included) to
the other end of the adaptor.
Ensure you have the correct
diameter hose or pipe that is
compatible with your water
discharge application.
Note:
The discharge hose or
pipe you are using must have a
minimum diameter of
19mm (3/4’’).
Note:
Ensure the discharge hose or pipe is not restricted in any
way and nothing is obstructing the hose or pipe when the pump
is in operation.
Connecting to the suction inlet
1. Teflon tape is required on threads to ensure
a water tight seal and prevent any leakage.
Wind Teflon clockwise on fittings.
2. Remove the plastic protection cover
from the suction inlet.
3. Insert 1” male threaded adaptor
(not included). Tighten firmly with
a spanner (not included).
4. Securely attach the input hose or
pipe (not included) to the other
end of the adaptor. Ensure you
have the correct diameter hose or
pipe that is compatible with your
water drawing source.
Note:
The suction pipe should have
an internal diameter of at least
25.4mm (1”); it must be kink
resistant and suitable for pump use.
Ensure the input hose or pipe is not restricted in any way.
2. SUCTION INLET
3. DISCHARGE OUTLET
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
WARNING!:
RISK OF INJURY! IF THE COMPONENTS
ARE NOT COMPRESSION-PROOF OR IF THEY ARE
IMPROPERLY INSTALLED, THE PRESSURE LINE COULD
BURST DURING OPERATION.
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
POTABLE
WATER
WARNING!:
USE FOOD GRADE FITTINGS IF INTENDED
FOR DRINKING.
