ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
POTABLE
WATER
800W POTABLE WATER
CONSTANT PRESSURE PUMP
This constant pressure pump is designed for pumping clean
water in the house and garden. It is ideal for providing domestic
water supply to laundries, toilets and outdoor taps, combined
with a trigger nozzle and hose for garden watering and washing
cars.
Tested to AS/NZS 4020 as suitable for use in contact with
drinking water. The Standard requires that the pump does not
affect the taste or appearance of water; does not support the
growth of microorganisms; and does not release cytotoxic or
mutagenic compounds or metals
Your pump requires no assembly before use other than the
connection of suitable inlet/outlet hose or pipe adaptors (not
included).
Positioning the pump
The device must be placed
on a horizontal, level surface
that is sufficiently capable of
supporting the total weight
of the device when filled with
water.
Note:
The installation site must
be well ventilated and protected
from the effects of weather.
Note:
When operating indoors you must ensure that there is a
drain in the floor or a mechanism to prevent leakage.
1. Discharge outlet
2. Pump control unit
3. Carry handle
4. Control unit union
5. Priming plug
6. Pump body
7. Suction inlet
8. Base
9. Drain plug
POTABLE PRESSURE PUMP
KNOW YOUR PRODUCT
1. SETTING UP
SETUP & PREPARATION
FIRM BASE
POTABLE
WATER
800W POTABLE WATER
CONSTANT PRESSURE PUMP
WARNING!:
ENSURE THE PUMP IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS.
ACCESSORIES
10. Teflon tape
1
8
9
10
4
5
6
7
3
2
