DESCRIPTION OF SYMBOLS
TROUBLESHOOTING
SPARE PARTS
Double insulated
Danger of electric shock
FAULT
POSSIBLE CAUSES
SOLUTION
The Cement
Mixer does not
start.
Not Connected to mains
power
Connect to mains power
Power cord or plug is
defective.
Contact Ozito customer
service.
Other electrical defect to the
product
Contact Ozito customer
service.
Cement Mixer
does not reach
full power
Extension cord not suitable
for operation with this product
Use suitable extension
cord..
Power source (e.g.
Generator) has too low
voltage.
Connect to another power
source.
Mixing volume is too large
Reduce the amount of
material
Unsatisfactory
result
Mixer blades are dull/
damaged
Replace with new ones
Mixer blades not suitable for
work piece material
Use proper mixing blades
Excessive
vibration or
noise
Mixer blades are dull/
damaged.
Replace with new ones
Bolts/nuts are loose.
Tighten bolts/nuts.
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse or Homebase
store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: [email protected]
