6. PLACEMENT
7. CONTROLS
The product may only be placed on a flat surface. To provide added
stability screw the product to a concrete floor with the proper fixation
materials including bolts, screws and washers.
1. Disengage the locating pins
by pulling out on the control
handle away from the locking
plate to allow the drum to
rotate.
The drum can be set
at different position to
cater for mixing mortar
and concrete, emptying
or storing.
The Support Leg has two
mounting holes that can be used
to ensure sufficient stability. Use
two screws or bolts (not included,
recommended size M10 ) to secure.
ON
OFF
Mortar
Concrete
Unload
Storage
ON
OFF
Mortar
Concrete
Unload
Storage
3. Engage the control handle
locating pins to secure the
position.
Drip Loop
To avoid the possibility of the appliance plug or power point getting wet,
the user should arrange a “drip loop” in the cord connecting the cement
mixer to a wall mounted power point.
The “drip loop” is the part of the cord that sits below the level of the
power point (or the connector if an extension cord is used). It prevents
water travelling along the cord and coming in contact with the power
point.
CMX-125U
WARNING!
DO NOT PLACE ANY MATERIAL UNDER THE
PRODUCT TO ADJUST THE HEIGHT OR TO ATTEMPT
TO IMPROVE ITS STABILITY! IF THE PRODUCT IS ON
AN ANGLE AND/OR WOBBLY, MOVE IT TO A DIFFERENT
LOCATION. NEVER OPERATE THE PRODUCT ON SOFT
SURFACES SUCH AS A LAWN OR GRAVEL SINCE IT
COULD SINK OR TIP OVER DURING OPERATION!
CAUTION!
TO REDUCE THE RISK OF ELECTRICAL
SHOCK, THE USE OF A RESIDUAL CURRENT DEVICE
(RATED 30mA OR LESS) IS RECOMMENDED.
OPERATION
Setting the Operating Position
2. Rotate the drum to the desired
position by aligning the
locating pin with two of the
holes in the locking plate.
ON
OFF
Mortar
Concrete
Unload
Storage
Turning the Mixer On and Off
ON
OFF
Mortar
Concrete
Unload
Storage
1. To start the mixer press the green
on “I” button.
2. To stop the mixer press the red off
“O” button..
ON
OFF
Mortar
Concrete
Unload
Storage
WARNING!
HOLD THE CONTROL HANDLE TIGHTLY
WHILE TURNING IT.
