![background image](http://html1.mh-extra.com/html/ozito/bvp-2400/bvp-2400_operation-manual_1666180009.webp)
9
Fitting the collection bag
Prior to fitting the collection bag (8), the lower & upper
tubes must be fitted to the housing.
1. Attach the strap on the collection bag to the hook
underneath the upper tube (Fig. 4).
2. Attach the plastic
connector to the outlet in
the housing, ensuring that
the latch at the back
‘clicks’ into position
(Fig. 5 & 6).
To remove the collection bag,
disconnect the attachments in the reverse order.
Note:
As a safety feature the blower vac will not function without the collection bag
connected.
Fitting the patio head
The patio head is ideal for vacuuming flat surfaces such
as driveways and patios, depending on the application
the patio head can be easily fitted or removed from the
blow/vac tube.
1. Hold the blower/vac upside down so you are looking
down into the blow/vac tube.
2. Ensure the patio head is positioned correctly.
3. Firmly press the patio head into the blow/vac tube until it is secure.
Extension cord restraint
During use of the blower vac, the extension cord will
continually be pulled as you move from one area to
another.
An extension cord restraint (13) has been provided to
prevent the electrical connection between the extension
cord and blower vac plug being forced apart.
Position the extension cord through the cord restraint
channels (Fig. 8).
Fig. 4
Fig. 5
ASSEMBLY (cont.)
Fig. 6
Fig. 7
Fig. 8
BVP-2400 Manual.qxd 9/11/09 5:40 PM Page 9