![background image](http://html1.mh-extra.com/html/ozito/bvp-2400/bvp-2400_operation-manual_1666180008.webp)
8
Assembling the tubes to the blower vac
1. Insert lower tube (1) into upper tube (2) and
push them together until they are connected
firmly (Fig. 1).
2. Loosen and remove the four screws from the
upper tube using a screwdriver (not included).
(Fig. 2)
3. Slide the assembled tubes into the
motor housing (Fig. 3).
4. Secure the previously removed screws into the
lower screw holes on both sides of the blower
vac housing.
5. Check the tubes are firmly secured to the
motor housing.
Caution:
In the interest of safety the tubes
should not be dismantled after they have
been assembled.
NOTE: THE BLOWER VAC HAS BEEN DESIGNED SO AS NOT TO SWITCH ON
SHOULD THE TUBES NOT BE CONNECTED PROPERLY.
THIS IS A SAFETY DESIGN TO ENSURE THE USER DOES NOT COME TO ANY
HARM. DUE TO THE MULCHING FUNCTION IT WOULD BE HAZARDOUS TO
USE THIS TOOL WITHOUT THE TUBES FULLY ASSEMBLED.
ENSURE THE TUBES ARE PROPERLY SECURED PRIOR TO OPERATION.
ASSEMBLY
Fig. 1
Fig. 2
Fig. 3
BVP-2400 Manual.qxd 9/11/09 5:40 PM Page 8