Rotation Direction for the Air Impact Wrench
1. Push the Forward/Reverse Button towards the front of the tool for
forward movement.
2. Push the Forward/Reverse
Button towards the back of the
tool for backwards movement.
Rotation Direction for the Air Ratchet
1. Turn the Forward/Reverse
Button anti-clockwise for
forward rotation.
2. Turn the Forward/Reverse Button clockwise for reverse rotation.
Air Flow Regulation
Air flow regulation can be controlled on the Air Impact Wrench and Air
Chisel. This alters the rotation rate of the tool.
1. To restrict the air flow, push
in and turn the Air Flow
Regulator Valve on the tool
anti-clockwise to a lower
setting.
Note:
There are four air settings.
Turning the Tool On
1. Depress the On/Off Trigger to
turn the tool on.
2. To turn off the tool, release the On/Off Trigger.
Attaching Hex Drive Bits to the Ratchet
1. Press the Bit Holder onto
the Socket Retainer of the
Ratchet.
2. Push the desired Hex Drive
Bit into the Bit Holder until it
clicks into place.
3. To remove the Bit or Bit Holder, simply pull it off the Socket
Retainer on the tool.
Installing Chisels in the Air Chisel
1. Screw the Quick Change
Spring onto the front end of
the Air Chisel.
2. Pull back the free end of the
spring and slide the desired
Chisel into the hole.
3. To remove the Chisel, pull back the free end of the Spring and slide
the Chisel out.
Note:
Alternatively, the Chisel may be placed into the chuck on the Air
Chisel before attaching the Quick Change Spring.
2. AIR TOOL CONTROLS
OPERATION
