4. CLEANING & MAINTENANCE
MAINTENANCE
Removing
condensation water
The condensation water must be
drained off after each use by opening
the drain valve, at the bottom of the
tank.
The drain plug can be opened via the
lever, turn 90º. Tilt the pressure tank
so that the drain valve is the lowest
point of the tank and the condensed
water can drain off completely .
IMPORTANT!
BEFORE CLEANING YOUR OIL FREE AIR
COMPRESSOR OR CARRYING OUT ANY MAINTENANCE
PROCEDURE, MAKE SURE THAT THE MOTOR IS OFF AND
THE TOOL DISCONNECTED FROM THE POWER SUPPLY
TO PREVENT ACCIDENTAL STARTING.
IMPORTANT!
WAIT UNTIL THE COMPRESSOR HAS
COMPLETELY COOLED DOWN. RISK OF BURNS!
IMPORTANT!
ALWAYS DEPRESSURIZE THE TANK BEFORE
CARRYING OUT ANY CLEANING AND MAINTENANCE WORK.
• Check the tank for signs of rust and damage each time before
using. Do not use the compressor with a damaged or rusty tank.
Note:
This air compressor is designed to operate without oil.
Cleaning
• Keep the safety devices free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it with compressed air
at low pressure.
• We recommend that you clean the appliance immediately after you
use it.
• Clean the appliance regularly with a damp cloth and some soft soap.
Do not use cleaning agents or solvents; these may be aggressive to
the plastic parts in the appliance. Ensure that no water can get into
the interior of the appliance.
• You must disconnect the hose and any spraying tools from the
compressor before cleaning. Do not clean the compressor with
water, solvents or the like.
