ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Transport handle
2. ON/OFF switch
3. Pressure regulating knob
4. Quick-release air outlet
5. Support foot
6. Safety valve
7. Pressure gauge
8. Tank
9. Drain valve
10. Wheel
11. Hub caps
12. Axle
13. Caps
COMPACT AIR COMPRESSOR
KNOW YOUR PRODUCT
1. ASSEMBLY
Pre-setup checks
• Examine the machine for signs of transit damage. If damaged, do not
use, contact Ozito .
• The compressor should be set up near the area of use.
• Avoid long air lines and long supply lines (extensions).
• Make sure the intake air is dry and dust-free.
• Do not set up the compressor in damp or wet rooms.
• The compressor may only be used in suitable rooms (with good
ventilation and an ambient temperature from 5°C to 40°C). There must
be no dust, acids, vapours, explosive gases or inflammable gases in
the room.
• The compressor is designed to be used in dry rooms. It is prohibited
to use the compressor in areas where work is conducted with sprayed
water. Before you use the machine, make sure that the mains voltage
complies with the specifications on the rating plate.
Fitting the wheels
Note.
You must fully assemble the
compressor before using it for the first time.
1. Push the axle through the air compressor
frame.
.
2. Place a wheel onto the axle with the
flat side facing towards the compressor,
followed by a cap.
3 Push the hub cap onto the centre of the
wheel so it clicks into place.
4. Repeat steps 2 & 3 with the
second wheel.
SETUP & PREPARATION
1
2
3
4
5
6
8
12 13
9
10 11
7
