User Manual of Ozaas Network Camera V8.1.4.3
3
Warning
Electrical safety regulations of the nation and the region must be strictly followed during
installation or use.
Please use the matched power adapter from standard company.
Do not connect multiple IPCs with one single power adapter (Overload for adapter may
lead to over-heat or fire hazard.
Shut down the power while connecting or dismounting the device. Do not operate with
power on.
The device should be firmly fixed when installed onto the wall or beneath the ceiling.
Shut down the power and unplug the power cable immediately when there is smoke,
odor or noise rising from the IPC. Then contact the dealer or service center.
Please contact the local dealer or latest service center when IPC works abnormally. Do
not attempt to disassemble or modify the device yourself. (We shall shoulder no
responsibility for problems caused by unauthorized repair or maintenance.
Cautions
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth
with a bit of ethanol and wipe it gently. If the camera will not be used for an extended
period of time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at the strong light such as sun or incandescent lamp. The
strong light can cause fatal damage to the
camera.
The sensor may be burned out by a laser beam, so when any laser equipment is being
used, make sure that the surface of the sensor not be exposed to the laser beam.
Do not place the camera in extremely hot, cold temperatures (the operating temperature
should be between -30°C ~ 60°C), dusty or damp environment, and do not expose it to
high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for a proper operating
environment.
Keep the camera away from water and any liquid.
While shipping, the camera should be packed in its original packing.
Improper use or replacement of the battery may result in hazard of explosion. Please
use the manufacturer recommended battery type.