OZ Charge PX2408M, Owner'S Manual

Page: 9 / 12

7 • Oz Charge manual
www.ozcharge.com.au
TROUBLE SHOOTING
Problem Indication Possible Causes Suggested Solution
Charger does
not work.
Indicator lights
are not on.
- No AC power.
- Unit not connected to
battery.
- Blown AC fuse (Internal).
- Check AC connection and
make sure Power Point and
Charger are switched ON.
- Check Battery is connected
to Charger properly.
- Contact Supplier for Service.
(No user serviceable parts
inside)
Charger has
no DC output.
Fault LED is
Flashing.
- Output is short circuited.
- Output cables are not.
connected to the battery.
- Output Reverse polarity
connection.
- Battery Weak / Damaged.
- Charger has overheated.
- Check that there are no
foreign objects inside the 3
Pin XLR connectors.
- Check that the 3 Pin XLR plugs
have been securely
connected.
- Check that the XLR plugs have
not been forced together
incorrectly.
- Move charger to a cooler area.
- Refer to LED Indicator Table.
No charging
current.
Fault LED is ON - Battery is severely
sulphated.
- Battery has a damaged cell.
- Check the Battery condition,
age etc.
- Battery may need
replacement.
Long charging
time, Full light
does not
come on
Fault LED is
Flashing.
- Battery capacity too large.
- Battery is defective.
- 4 hours Soft Start timed out.
- 16 hours Bulk Charge
timed out.
- Check the charger
specification matches the
battery capacity.
- Battery cannot be charged
and must be replaced.
REPLACEMENT PARTS
For the full range of replacement parts and accessories, please visit our website:
www.ozcharge.com.au. / www.ozcharge.co.nz