VZR.235900.000 IG
Cube С-04 Turnstile
Installation Guidelines
20
The RC panel shall be connected using the labeling of contacts in Table 2.
Table 2 - Labeling of contacts for RC panel connection
Labeling of contacts
Wire color
12V
Red
CL
Yellow
CH
Green
GND
Blue
5.3 Connecting Access Monitoring and Control System (optionally)
Connect AMCS controller to the group of contacts
Control
on the
motherboard.
Labeling of contacts: LEFT, RIGHT, STOP, GND. Purpose of contacts is
specified in Table 3.
Table 3 - Purpose of AMCS contacts
Labeling of contacts
Purpose of contacts
LEFT, RIGHT
left/right single passage
(lowest priority)
STOP
no passage is allowed (“Stop” mode)
(highest priority)
GND
common contact
Inputs for AMCS connection differ by priorities:
1)
STOP input is of the highest priority. When closing this input to GND contact, the turnstile
switches to “Stop” mode and does not respond to other effects;
2)
LEFT and RIGHT are of equal low priority and include the single passage in one or other
direction. If both inputs are closed, the passage is allowed in the direction, under which the
input was closed first. In case no passage was performed, the turnstile switches to “Stop”
mode automatically after 5 seconds.
