Version 1.9 rev 21 Oct 2019
36
IKon-XL
Power Requirements
The iKon-XL has been designed for use specifically with the CCU-500 camera control unit which integrates power and
camera control functions in one unit. Power supply, consumption and signal information is provided below:
CCU-500 Mains Input
100-240 V AC 50/60 Hz
2A max. (flexi-cooled models)
5.33A max. (deep cooled models)
Low Voltage/Current Outputs
+39V 80mA
+15V 2A
+8V 290mA
-8V 400mA
Shutter Drive 24V 1.2A 100ms pulse and 0.3A hold current.
Low Voltage Output Connector
of CCU-500
Fischer DBP 105 A110-139 (CCU-500A)
Fischer DBP 105 A110-239 (CCU-500B)
Low Voltage Input Connector of iKon-XL
Fischer DBP 105 Z110-139 (CCU-500A)
Fischer DBP 105 Z110-239 (CCU-500B)
Camera Control Cable pin-outs
Pin Number and Description
1. TEC_N
2. TEC_P
3. +15
4. Gnd
5. Shutter_Drv_N
6. Shutter_Drv_P
7. -8V
8. +8V
9. +8V
10. +40
11. Shutter_Opn_B
12. Shutter_Opn_A
13. TEC_Vctrl_Rtn
14. TEC_Vctrl
15. Gnd
16. Gnd
Power Consumption
Flexi-cooling Model (single cooler)
Camera Head + CCU-500, 240V/100V (Typ.): 165/180 W
Camera Head Only (Typ./ Max.): 133/135 W
Deep cooled Model
Camera Head + CCU-500, 240V/100V(Typ): 465/480 W
Camera Head Only (Typ./ Max.): 433/435 W
