Version 1.9 rev 21 Oct 2019
28
IKon-XL
3.12.1 i
nstalling
f
ibRe
o
ptic
c
aRd
d
RiveRs
(W
indoWs
only
)
The Fibre Optic Adapter card driver is pre-installed with Windows 10, however it is still recommended to install
the supplied driver versions. Drivers (for windows 7, 8, 8.1 and 10) should be installed as follows:
1. On the supplied software CD navigate to the fibre optic card drivers e.g.:
Texas_Instruments_xHCI_Driver_v1.16.4.0_WHQL_(Multilanguage) and run the Texas_Instruments_xHCI_Driver_
v1.16.4.0_WHQL_(Multilanguage).exe.
Note: Select the appropriate driver to match the OS of the control PC e.g. Windows, 7. 8, 8.1 or 10. File locations
and versions may differ from those shown in this example.
2. Follow the on screen instructions of the install wizard.
3. If successfully installed the device should show up as “Texas Instruments USB Root Hub”.
4. Launch “Andor Solis”, the software should automatically detect the camera. The camera should now be ready
to use.
