17
OXE DIESEL COASTKEY MANUAL
OPERATION
Starting and stopping engine(s) from remote control
Starting engine(s)
1.
On the remote control, press and hold the
START/STOP
button.
The
green LED
indicator on the remote control
flashes to indicate that ignition is on.
After h
olding for about 2 seconds, the start signal goes on to all installed engines.
2.
On the remote control, r
elease the
START/STOP
button when engine(s) have started.
The Kill Switch function is enabled - ON.
The green LED
indicator
on the start panel lights and remains on.
Stopping engine(s)
1.
On the remote control, press and hold the
START/STOP
button.
The
green LED
indicator on the remote control
flashes to indicate that ignition is on.
After h
olding for about 2 seconds, the ignition signal goes off and stops signal on all installed engines.
2.
On the remote control, r
elease the
START/STOP
button when engine(s) have stopped.
The Kill Switch function is deactivated - OFF.
The start panel will be locked when the ignition goes off.
Turning the ignition on
1.
On the remote control, press and release the
START/STOP
button.
The
green LED
indicator on the remote control
flashes to indicate that ignition is on.
The Kill Switch function is enabled - ON.
On the start panel, the yellow LED
indicater
lights and remains on to indicate that ignition is on.
Turning the ignition off (engine(s) not started)
If ignition is switched on and engine(s) have not been started:
1.
On the remote control, press and release the
START/STOP
button.
The
red LED
indicator on the remote control
flashes to indicate that ignition is off.
The Kill Switch function is deactivated - OFF.
