User’s Manual of
OWON
Color Mixed Signal Digital Storage Oscilloscope
Mode Edge Set
vertical
channel
trigger type for edge trigger.
Slop Rising
Falling
Trigger in signal rising edge
Trigger in signal falling edge
to Next menu
Back to previous menu
Trigger
mode
Auto
Normal
Single
Acquire waveform whatever detect trigger condition or not
Only acquire waveform when match trigger condition
Only acquire waveform for single time when detect trigger
condition then stop
Coupling AC
DC
HF
LF
Not allow DC portion to pass
Allow all portion pass
Not allow high frequency of signal pass and only low
frequency portion pass.
Not allow low frequency of signal pass and only high
frequency portion pass
Follow up below step to set CH1 as rising slope edge trigger and trigger mode is auto,
coupling is DC.
1
、
Press “Trig menu”
2
、
Press “F1” to choose type as“Single”
3
、
Press “F2” to choose source as “CH1”
4
、
Press “F3” to choose mode as “Edge”
5
、
Press “F4” to choose slope as “Rising”. Display as Fig.34
6
、
Press “F5” to choose “Next menu”
7
、
Press “F2” to choose trigger mode as “Auto”
8
、
Press “F3” to choose coupling as “DC”(refer to Fig.35)
46
