5
.Menu Interpretation
54
5.12.6 [Network Meas
►
]
When the source is “TG”, tracking source network measurement
function is available, mainly for amplitude and frequency
characteristics measurement; RF output and spectrum
measurement is fully synchronized, can be used as a scalar
network analyzer. When the network measurement function is "on",
the measurement results show relative values after "normalized",
expressed in "dB". When the network measurement function is
"off", the measurement shows the spectrum measurement result,
expressed in "dBm".
1) [Network Meas On Off]
Turn on or off the tracking source network measurement function.
Tracking source network measurement function, mainly for
amplitude and frequency characteristics measurement; RF output
and spectrum measurement is fully synchronized, can be used as
a scalar network analyzer. When the network measurement
function is "on", the measurement results show relative values after
"normalized", expressed in "dB". When the network measurement
function is "off", the measurement shows the spectrum
measurement result, expressed in "dBm".
2) [Output Level]
Used to set the output power of the trace source.
3) [Ref Level]
This soft menu is used to track the source network measurement of
the user to adjust the measurement results display location.
4) [Sweep Points]
Used to set the number of scanning points for network
measurements.
5) [Sweep Time]
Used to set the scan time for network measurements.
