5
.Menu Interpretation
39
Single-tap to move the
active marker to the
desired frequency
5.6.1.2 [Trace 1 2 3 4 5]
In the trace measurement, the marker used to activate the traces.
5.6.1.3 [Normal]
One of the marker types, which is used to measure the values of
X (Frequency or Time) or Y (Amplitude) at certain point of the
trace. When selected, a marker will appear with its marker
number such as "1" on the trace.
Key points:
If no active marker exists currently, a sing frequency marker will
be activated automatically at the center frequency of current
trace.
You can use the knob or numeric keys to move the marker. The
readouts of the marker will be displayed on the upper right of the
screen.
The readout resolution of the X-axis corresponds to the span
and sweep points. For higher resolution, add sweep points or
reduce the span.
5.6.1.4 [Delta]
