31
BIDI MODE
The Link Wizard is the name of the process used to set up the Fiber OWL 7 BIDI for a certification test. During the Link Wizard,
the user will input job-related information and key test parameters, set the optical reference, and verify the quality of any additional
test cables.
This section will walk the user through the Link Wizard for a typical bi-directional certification test using
BIDI
mode. It is assumed
the link has patch panels on both ends of the fiber link under test, and the user is using the 1-jumper reference method.
PAIR
and
CERT
test modes also utilize the Link Wizard. Users should be able to adapt this
BIDI
mode example to
PAIR/CERT
mode tests.
OVERVIEW
MASTER
STARTUP MENU
RESUME TESTING
CREATE NEW LINK
LOAD STORED LINK
SIMPLE METER
MAIN MENU
BACK
SELECT
EXIT
Start Link Configuration
All related test parameters entered into the Link Wizard will occur in the MASTER unit.
The REMOTE unit is not needed until the SET REFERENCE step, and may be set aside until then.
Press the Power button
on the MASTER. The STARTUP MENU will appear when the MASTER has completed powering
on.
STARTUP
