20
LINK PLANNING WORKSHEET
Fill out the blanks below with information about the link under test. This information will help you plan out the key information about
the link, and will be used to enter the link setup information in the MASTER.
PROJECT INFORMATION
Project Name:
Location:
RUN NAME SETTINGS
Fiber Group Name:
Starting Fiber Number:
FIBER PAIR SETTINGS (
PAIR/BIDI MODES ONLY
)
Fiber Pair Geometry: STRAIGHT CROSSED
Number Fiber Pairs By: STRAND PAIR
ENCIRCLED FLUX COMPLIANCE (
MULTIMODE TESTING ONLY
)
Is Encircled Flux compliance testing required? YES NO
Master End:
Remote End:
PAIR/BIDI -- use REMOTE
CERT/LOSS -- use standalone light source
REMOTE
MASTER
LINK CONFIGURATION INFORMATION
Fiber Type:
Test Mode: PAIR BIDI CERT LOSS
Standard:
Splices:
Connections:
* for manual length entry in CERT mode only
*Length (m):
-jumper
Reference Method:
Source Port Test Cord: REFERENCE STANDARD
OPM Port Test Cord: REFERENCE STANDARD
