the IP aliasing entries an be used to create additional public IP address. These entries are always static
entries and can not use DHCP.
Click Apply to accept changes.
5.5 System Configuration – LAN
Click the entry on the left hand navigation panel for System Configuration – LAN. This directs you to the
System Configuration – LAN page.
This set up the default numbers for the four octets for a possible private LAN function for the AP. It also
allows changing the default numbers for the LAN Subnet Mask. The Local LAN port provides local
access for configuration. It is not advisable to change the private LAN address while doing the initial
setup as you are connected to that LAN. If you do change DHCP IP address as new one, you need use
the IP you key in to enter configure screen again after clicking Apply button.
AirLive WH-9100-MESH User’s Manual
26
