Firewall. The NAT provides private IP address for the wireless clients and the Firewall enhance the
security of wireless network.
5.4 System Configuration – WAN
Click the entry on the left hand navigation panel for System Configuration – WAN. This directs you to
the System Configuration – WAN page.
The default IP of WAN
is as static IP. You
need input the
information that the AP
requires in order to
allow the wireless
devices (9100MESH)
access to the wired
LAN. This will be the IP
address, Subnet Mas
Default Gatewa
where needed, DNS1
and 2. The default WAN port value is IP Address: 192.168.254.254, Subnet Mask: 255.255.255.0,
Default Gateway: 192.168.254.1.
k,
y, and,
You also can choose “Using DHCP to get an IP address”. By this way, the 9100MESH will get an IP
address from DHCP server.
Click Apply to accept changes.
5.4.1 IP Aliasing
You can add
up to ten
additional IP
aliases on the
WAN port, if
you use
WH-9100ME
SH product
and set up its
operation
mode as
Gateway
mode.
The IP aliasing entries can be used by the virtual server to map a public IP address to a private IP
address. If the virtual server needs to map multiple public IP addressed to multiple private IP address,
AirLive WH-9100-MESH User’s Manual
25
