NEOxl 80 Spare Chassis Replacement Instructions
10400904
©2019 Overland-Tandberg
Page 2 of 8
Prepare the Library
Save the Configuration
This process is only needed for the NEOxl Base Module.
1.
If you are saving the configuration file to a
USB drive
,
insert the drive into one of the ports on the Base Module.
2.
Navigate to the
Configuration > System > Save/Restore
Configuration
screen.
3.
Select the
destination
location for the download:
• RMI
: Downloads the file to the browser or system
running the RMI.
• USB Device Front
: Downloads the file to the USB
drive inserted into the front USB port.
• USB Device Rear
: Downloads the file to the USB
drive inserted into the rear USB port.
4.
Click
Save
.
Remove Tape Cartridges
Remove the tape cartridges from just the Base Module or
Expansion Module being replaced.
IMPORTANT: Overland recommends that you remove the
cartridges to reduce the unit’s weight prior to removal.
1.
Open the
left door
.
2.
Using a small flat head screwdriver or Torx driver, gently
push in the release tab located in the middle next to the
door.
CAUTION:
Do not exert force once you encounter
resistance. Doing so can damage the device.
3.
Slowly
pull the magazine
free of the latch.
4.
Remove
cartridges
from the magazine noting the slot
from which each cartridge was removed.
5.
Reinsert the
empty magazine
and close the door.
6.
If the
right magazine
is present, open the right door and
repeat
for the right magazine.
NOTE: Depending on the model, the optional right
magazine may have 20 or 40 cartridges and may or may
not have Mail Slots configured. The example provided here
shows all 80 slots with no mail slots configured.
1
2
3
11
12
13
21
22
23
31
32
33
4
5
6
14
15
16
24
25
26
34
35
36
7
8
9
17
18
19
27
28
29
37
38
39
10
20
30
40
Left Magazine
41
42
43
51
52
53
61
62
63
71
72
73
44
45
46
54
55
56
64
65
66
74
75
76
47
48
49
57
58
59
67
68
69
77
78
79
50
60
70
80
Optional Right Magazine
