Overland Data LoaderXpress LXL1U11, Installation & User Manual, Page: 53 / 128

LoaderXpress - LXL1U11 3-11
Selecting Control Panel Display Modes
As previously described, the POST Screens, the Initialization Screen and the Default
Screen appear without operator or host intervention. The Fault Screen is displayed
whenever a conditon fault occurs. The following display screens appear in response to
operator interaction.
Entering the Menu Mode
When you press the Enter button to access the Menu Mode, the Ready light goes out.
This means that the module is offline, and the module responds to all SCSI commands
from the host by reporting Not Ready until you exit the Menu Mode and the Ready
light goes on. To prevent inadvertent interruption of host operations, you may lock out
the Menu Mode using the Security Menu (refer to the
“Security Menu”
later in this
chapter). When the Control Panel is locked, you must enter your unlock code in order
to display the Main Menu. The Show Status Menu remains accessible. It may be
displayed from the Default Screen at any time by pressing the Escape button.
When the Default Screen appears on the screen, you can enter the Menu Mode by
pressing the Enter button. The Main Menu, screen displays.
Figure 3–10. Main Menu
Unlocking the Control Panel
If the Control Panel is locked, the following screen displays. In order to access the
Main Menu, you must enter the unlock code for your LoaderXpress LXL1U11. If you
do not know the code, contact your system administrator.
Load/Unload
Remove Magazine
u
Show Status Menu
Maintenance Menu