Overland Data LoaderXpress LXL1U11, Installation & User Manual, Page: 108 / 128

6-26 LoaderXpress - LXL1U11
The unit will be disconnected for approximately five seconds.
Reboot Unit, Using COM Terminal Emulator
1) Press the Enter key to display the WebTLC Configuration Menu.
2) Type ‘13’ at the prompt to select the Reboot WebTLC option, and press
the Enter key.
3) Type ‘y’at the new prompt, and press the Enter key.
The unit reboots.
Operation:
With WebTLC configuration complete, you can now exercise Total Library
Control from a remote host. This assumes that you are familiar with the hands-on
control panel operations of your automated tape handling equipment.
This section also explains extended or enhanced functionality that is available on
WebTLC but not always found on deployed hardware systems.
WebTLC Access
To access WebTLC:
NOTE: Note: The library must be in the ready mode to establish communications with
the WebTLC. If unable to access the unit with your browser, verify the library is not
being operated locally.
4) Type the WebTLC IP address in the Location field of your Internet
browser, and press the Enter key.
The browser connects to WebTLC and displays the login prompt: