Overland Data LoaderXpress LXL1U11, Installation & User Manual, Page: 3 / 128

LoaderXpress - LXL1U11 i
Preface
Purpose of This Manual
This manual provides step-by-step installation instructions, and information required
for ongoing use and maintenance of the LoaderXpress 1U11 tape drive system. This
manual is written for the installer and user of this equipment.
Organization
The following information is contained in this manual.
Chapter 1: Introduction - Provides an introduction to the Overland Data LoaderXpress 1U11,
along with a brief description of the benefits, features and tape capacities, drives
and lists the models covered in this manual.
Chapter 2: Installation - Presents step-by-step procedures for unpacking and installing the
LoaderXpress 1U11, interface connections and a description of the LoaderXpress 1U11
configuration options.
Chapter 3: Operation - Describes front panel operations for the LoaderXpress 1U11, along with
inserting and removing tape cartridges, and tape requirements.
Chapter 4: Maintenance - Describes procedures for using and storing the cleaning cartridge
with the Overland Data LoaderXpress 1U11, required slot location, along with
running the cleaning cartridge from the front panel, and the Auto Clean mode.
Chapter 5: Troubleshooting - Provides problem diagnosis, error recovery procedures, and
Fault Symptom Codes to aid in troubleshooting potential error conditions with
LoaderXpress 1U11.
Chapter 6: WebTLC - Describes the interface device built into your LoaderXpress 1U11 that lets
you monitor and control your automated tape library from any terminal connected
to your network or via the Internet
Appendix A: Specifications - Contains LoaderXpress 1U11 specifications, and EMI compliance
information.
Index: Index - Provides a quick reference to useful features and information about the
LoaderXpress 1U11.