Overland Data LoaderXpress LXL1U11, Installation & User Manual, Page: 38 / 128

2-12 LoaderXpress - LXL1U11
Library Options
Configuration
Shows you the LXL1U11 is configured as a stand-alone module. The value is
Standalone.
Unload Mode
Allows you to determine whether a SCSI Move Medium command is interpreted
as Implicit or Explicit. If Implicit, the module unloads a drive before attempting to
move a cartridge from that drive. If Explicit, the host must issue a SCSI Unload
command to a drive before each Move Medium command that removes a cartridge
from that drive. The Default is Implicit.
Numbering
Allows you to specify whether SCSI elements in the unit display zero based or one
based. This affects only the front panel display, not the actual SCSI element
addresses. The Default is One Based.
Auto Clean
Allows you to enable or disable an automatic cleaning cycle which operates as
part of the cartridge unload sequence whenever the Use Cleaner LED comes on.
To use this option, you must have reserved a slot for a cleaning cartridge using the
Reserve Slots option. The Default is Disabled.
NOTE: This function is currently not available. It will be made available in a future
firmware release.