Overland Data LoaderXpress LXL1U11, Installation & User Manual, Page: 32 / 128

2-6 LoaderXpress - LXL1U11
• Connect the cable from the remaining connector of the
first device to one connector of the second SCSI device,
and so on. You can connect them in any order
• Attach the terminator to the remaining SCSI connector
of the last device in the chain.
Connecting to the Power Source
The AC power cable is a standard grounding AC cable, which attaches to an IEC-
compatible connector on the rear panel. Connect the cable to the connector on the
module, and connect the other end to a reliably grounded AC outlet or rack power
outlet.
To maintain product safety compliance, use a power cord with a suitable electrical
rating:
Configuration
You are able to change configuration option settings if necessary from the Control
Panel. Before changing any settings, refer to your host system documentation or
contact your Technical Support representative.
A Configuration Example – Setting the SCSI ID
1) Turn the module on, and wait until the Power-On Self Test (POST)
concludes, and the Default Screen displays:
Table 2–2 Power Cord Ratings
Country/Area Power Cord Rating
United States UL listed
Canada CSA certified
Europe Harmonized marked <HAR> or nationally
certified