4.6
Sectional Doors - Center Mount Direct Couple (
Right hand unit shown
)
NOTES:
1) A clearance of 8” should be allowed for access to all electric
connections.
2) Average door travel speed varies per drum used.
3) Operator mounting brackets mount to wall.
Refer to Center Mount Supplemental Instruction, ( Included with Center Mount Kit)
14 RPM UNIT SHOWN
VERTICAL CENTER MOUNT
HORIZONTAL CENTER MOUNT
HP
REQUIRED MOUNTING KIT
PART NUMBER
1/2, 1 CENTER MOUNT VERTICAL
OPMKCMVHX.S
1/2, 1 CENTER MOUNT HORIZONTAL
OPMKCMHHX.S
3
CENTER MOUNT VERTICAL
OPMKCMVHX3HP.S
3
CENTER MOUNT HORIZONTAL
OPMKCMHHX3HP.S
SUPPORT REQUIRED
(NOT PROVIDED)
SUPPORT REQUIRED
(NOT PROVIDED)
Figure 9
Figure 10
Section 4: Installation - Hoist
The RHX® Hoist Operators are factory assembled for right-hand
mounting (shown). Each model can also be converted to left-
hand mount See page 4.7 for instructions.
Refer to Direct Couple Supplemental Instruction, ( Included with Direct Couple Kit)
HP
REQUIRED MOUNTING KIT
PART NUMBER
1/2, 1 DIRECT COUPLE - 26RPM
OPMKDC26HX.S
1/2, 1 DIRECT COUPLE - 14RPM
OPMKDC14HX.S
3
DIRECT COUPLE - 14RPM
OPMKDC14HX3HP.S
