15
OKF-roof integration for slate and plain tile roofs,
basic set:
item no. 136 12 93
OKF-roof integration for slate and plain tile roofs,
extension set:
item no. 136 12 94
GB
Vertical installation
Valves, co systems
OKF - Flat-plate collector
Installation and operating instructions
Read installation and operating instructions carefully
before installing the collector.
The installation and operating instructions have to
remain with the user of the system.
Content:
Chapter
Page
1.
General information
.......................................................
15
1.1. Information regarding operating instructions .................. 15
1.2 Symbol explanation ......................................................... 15
1.3 Liability............................................................................. 15
1.4 Copyright ......................................................................... 15
2
Safety notes
...................................................................
16
2.1 Correct use/
Initial operation ................................................................ 16
2.2 Personnel......................................................................... 16
2.3 Specific risks ................................................................... 16
2.4 Other valid documents .................................................... 16
2.5 Important standards, rules, and EC directives
for the installation of solar collectors .............................. 16
3
Transport and handling
.................................................
16
3.1
Advice before installation . . . . . . . . . . . . . . . . . . . . . . . 17
4
Installation
......................................................................
18
4.1 Basic set for vertical roof integration............................... 18
4.2 Extension set for vertical roof integration........................ 19
4.3 Installation field................................................................ 20
4.4 Collector installation ........................................................ 22
5
Dimensions and technical data
....................................
27
5.1 Pressure loss chart OKF.................................................. 28
5.2 Hydronic circuitry............................................................. 28
1 General information
1.1. Information regarding operating instructions
These installation instructions give important advice as to the han-
dling of the collectors. The observance of all mentioned safety
notes and instructions is paramount for safe working conditions.
These operating instructions are to be read carefully before working
at or with the collector and especially before initial operation!
The instructions should remain with the Regusol station or the
storage cylinder so that they are always at hand.
1.2 Symbol explanation
Safety guidelines are displayed by symbols. These guidelines are
to be observed to prevent accidents, damage to property and
malfunctions.
WARNING!
Signalizes that nonobservance of guidelines may result
in injuries.
Working with sharp-edged sheet metal pieces
Attention – Risk of open injuries.
ATTENTION!
Emphasises danger which may cause damage to the
appliance.
!
NOTE!
Emphasises suggestions and other useful information
of operating instructions.
���
1.3 Liability
The manufacturer does not accept liability for damages or mal-
functions caused by nonobservance of the operating instructions.
1.4 Copyright
The operating instructions are confidential. They are exclusively
for persons dealing with the collector. Transfer of the operating in-
structions to a third person without written approval of the manu-
facturer is inadmissible.
