![background image](http://html1.mh-extra.com/html/oventrop/okf-series/okf-series_installation-and-operating-instructions-manual_1662713008.webp)
22
4.4 Collector installation
2
1
Installation tools: Tape measure, drill, crosshead bit PZ 2 and 3,
spanners sized 16, 19, 24 mm, hammer, cutter, silicone gun (if nec-
essary abrasive angle grinder with stone cutting disk).
Pipe conduit with foil: Cut foil in the shape of a trapeze, fold upper
part upwards and lower part downwards and fix onto the roof bat-
tens tightly. Humidity will escape sideways.
1. Align lower collector bracket with the roof batten and fix centrally
between two collectors and laterally at the edge of the collector
field.
2. Insert collectors (approx. distance between collectors 8 mm).
Insert silicone T-profile between collectors whilst pushing and pulling
to ease handling. Push collectors together flush with each other.
Screw upper collector bracket to the two collector edges with 2
dry wall screws 4 x 35 each.
Apply a thin layer of silicone between the edge of the T-profile and
the collector frame.
���
1.
2.
3.
4.
5.
6.
4 x