![background image](http://html1.mh-extra.com/html/oventrop/okf-series/okf-series_installation-and-operating-instructions-manual_1662713009.webp)
23
1
2
Connect collectors whilst holding them firmly to avoid damage to
the collector connection. ATTENTION: Risk of scalding during sun-
shine!
Connect collectors to the solar circuit. Check all collector connec-
tions when carrying out leakage test.
Insert solar sensor into the sleeve. Close opening with the help of
the rubber plug which is slipped onto the cable. Feed cable into
the roof.
Line up the wooden support against the collector and fix with the
help of dry wall screws 4 x 35 and 5 x 120.
Adjust tiles below the collectors and fix with dry wall screws.
Fix sheet metal clamps for lower sheet (1) and bend over onto tile
(2).
7.
8.
9.
10.
11.
12.