![background image](http://html1.mh-extra.com/html/oventrop/okf-series/okf-series_installation-and-operating-instructions-manual_1662713006.webp)
20
4.3 Installation field
With plain tile roofs, keep existing roof battens as support and fix the additionally required battens according to the dimensional
specifications. Coverings without lathwork (roof slates etc.), fix collector brackets and all other components directly onto the base.
If possible, define installation field so that the distance between one side of the collectors and the lateral roof covering is approximately 35
mm. Cut tiles (roof slates) to size for the opposite side. With large roof coverings it is recommended to take the mean of the collector field.
Installation dimensions [mm]
Number of collectors
Width of collector field
Width of installation field A
1 collector
1,160
1,230
2 collectors
2,325
2,395
3 collectors
3,490
3,560
4 collectors
4,655
4,725
5 collectors
5,820
5,890
Dimensions for installation field and location of battens. Use battens of the same thickness as the existing ones.
Additionally required battens are marked grey (5 pieces); length of battens = A (width installation field)
Outer dimensions of collector (L x W) = 1,930 x 1,160.