![background image](http://html1.mh-extra.com/html/oventrop/datalog-cs-bs-1/datalog-cs-bs-1_installation-and-operating-instructions-for-the-specialised-installer_1662720029.webp)
en
Installation
Data expor
t /
configuration
Eliminating er
rors
Configuration
W
eb interface
29
Indications
8
troubleshooting
Problems with the direct connection to a gigabit network device
Problem
Solution
When a device is
connected directly to
the Datalog CS-BS-1
using a gigabit network
adapter, no network
connection is estab-
lished.
Note
Not all network interface cards support 10
MBits/s half-duplex communication.
Î
Alternative A: Interconnect a 100 MBits switch
between the two devices.
Î
Alternative B: Set the network connection settings
of your computer to 10 MBits/s half-duplex.
User password not available
Problem
Solution
The user password is
not available.
When the user password is not available, the Datalog
CS-BS-1 has to be reset to its factory settings in order
to regain access to the web interface.
Note
When the Datalog CS-BS-1 is reset to its fac-
tory settings, the configuration will be erased.
9
Spare parts
S-Bus cable, 1.50 m
Mains adapter 100 … 240 V~ (12 V ,1A max)