en
Installation
Configuration
Data expor
t / configuration
W
eb interface
Eliminating er
rors
26
Indications
6
Basic configuration
The basic configuration does not require detailed knowledge about the solar ther-
mal system or the network environment and can be carried out using the guidelines
in this manual.
In order to carry out the basic configuration, proceed as follows:
Î
Finding the Datalog CS-BS-1 by means of the DeviceDiscoveryTool.
Î
Changing the web interface language.
Î
Changing the Live data screen language.
Î
Changing the user password.
Î
Changing the device name.
Î
Changing the time configuration.
Î
Configuring automatic firmware update configuration.
Î
Changing the remote access password.
6.1
Finding the Datalog CS-BS-1 by means of the DeviceDiscoverytool
The DeviceDiscoveryTool is a software that displays products that are connected
directly via the local network.
Note
The factory setting for both user name and password is
admin
.
Starting the DeviceDiscoverytool
All LAN-enabled products found are displayed.
Î
Click the Datalog CS-BS-1 to mark it, then click the Open button.
A new window opens.
Î
Enter user name and password.
The factory setting for both user name and password is
admin.
The home screen of the Datalog CS-BS-1 web interface opens.
6.2
Changing the web interface language
The web interface can be run in different languages.
Î
Click one of the small flags on the right-hand side of the Home screen, accor-
ding to the desired language:
• German
• English
• French
• Spanish
• Italian
The message
Language selection successful!
appears.
6.3
Changing the display
In order to select the language of the web interface, proceed as follows:
Î
In the main menu
Device Config
, select the sub-menu
General
.
Î
On the
General Configuration
tab, in the dropdown menu
Default Lan-
guage
, select one of the following languages:
• German (de)
• English (en)
• French (fr)
• Spanish (es)
• Italian (it)
Î
Click
Save configuration
.
The message
Configuration saved successfully!
appears.