![background image](http://html1.mh-extra.com/html/oventrop/136-12-30/136-12-30_installation-and-operating-instructions-manual_1662738014.webp)
14
4.2 Design of installation system
The couplings 136 16 22 cannot be mounted subse-
quently. Please observe the following installation order:
1. Mount first collector housing
2. Fit coupling in the compression connection
3. Mount second collector housing.
The pans for roof conduit are not included in the Oven-
trop product range.
4.1 Installation temperature sensor / collector con-
nections
The temperature sensor is installed in the hot supply and
is located on the left collector side .
Remove blind plug (M 12 x 1.5) from the left cover plug
and replace by screwed cable gland (M 12 x 1.5). Insert
temperature sensor through the screwed cable gland
into the immersion pocket (copper pipe) until stop (about
250 mm).
Illustr. 26: Left cover plug with blind plug
Illstr. 28: Left cover plug with screwed cable gland for the
fixing of a temperature sensor cable (e.g.
PT1000)
Blind
plug
Illustr. 29: Hold firm collector connections
The collector connections (supply and return) must
be held firm when tightening the compression connec-
tion. Tightening torque
쏜
40 Nm. Check compression
connections for leaks after filling the system. The OKP
collectors should, however, be submitted to a functional
test once a yer. The silver colouring of the lower part of
the glass bulb displays that the tube is faultless.
Screwed
cable gland
RL = Return VL = Supply
RL
VL
Illustr. 27: OKP 10 and OKP 20 collector in series
Roof conduit
Item no. 136 16 71 or 136 16 72
Elbow
Item no. 136 12 95
164 cm
14
cm
14
cm
14
cm
164 cm
86 cm
86 cm
0-10 cm
0-10 cm
0-10 cm
0-10 cm
Coupling
Item no. 136 16 22
•
•
•