background image

Page 1

HiTech Handheld Wireless Touchpad

HiTech Handheld 

Wireless Touchpad

Document Number: 466-1012 Rev. B

November 1997

INSTALLATION

INSTRUCTIONS

Product Summary

The HiTech Handheld Wireless Touchpad is a pocket-
sized, lightweight, portable touchpad that uses ITI Learn 
Mode™

 technology to control an ITI control panel.

The touchpad gives you the flexibility to arm and 
disarm the system, bypass sensors, control lights, send 
emergency alarms, and check the system’s status at your 
convenience.

The touchpad features include the following:

ν

Automatic Low battery reports to the panel

ν

Red/Green indicator light that responds differently 
to regular keypresses and panic button keypresses

ν

Police, Fire, and Auxiliary panic buttons

ν

Automatic supervisory reports to the panel every 64 
minutes

ν

Long life (5–8 years) 3 VDC lithium battery

ν

Operating temperature range: 10° to 120°F

ν

Wall-mounting option

ν

Learn Mode technology makes panel programming 
easy

ν

Convenient size and attractive style

ν

Compatible with all ITI Learn Mode panels, 
including CareTaker

®

  Plus, Commander 2000™

Concord, and SX-V Special.

Installation Guidelines

Observe the following guidelines when using and 
mounting the touchpad:

ν

Refer to the appropriate Reference Manual for 
guidelines on typical range for using this and other 
wireless devices.

ν

Avoid moist areas.

ν

Avoid excessive metal or electrical wiring, including 
furnace and utility rooms.

ν

Avoid exceeding the touchpad’s operating 
temperature limits of 10° to 120°F (-12.2° to 49°F)

Note:

If the touchpad is wall mounted or always kept at 
the installation site, set upper sensor number 89 
to ON. If the touchpad will occasionally be 
removed from the site (i.e. kept in an automo-
bile), set upper sensor number 89 to OFF.

Installing the Battery

To install the battery:

1.

Remove the battery cover by pressing down on the 
arrowhead and sliding it out (see Figure 1).

Figure 1. Removing the battery cover

1

2

3

6

9

8

5

4

7

ST

0

BY

OFF

STAY

AWAY

NO DE

LA

Y

CHIM

E

STAT

US

BYPASS

COM

MA

ND

8341G02A.DS4

60-597

1

2

3

6

9

8

5

4

7

ST

0

BY

OFF

STAY

AWAY

NO DELAY

CHIME

STATUS

BYPASS

COMMAND

8341G01A.DS4

Summary of Contents for 60-597







Reviews: