6
Hot or cold surfaces!
Risk of injury!
Do not touch without safety gloves.
The ball valve connector block may get very hot
during operation.
Sharp edges!
Risk of injury!
Only touch with safety gloves.
Threads, bore holes and edges are sharp.
Small components!
Risk of ingestion!
Store and install the ball valve
connector block out of the reach of children.
Allergies!
Health hazard!
Do not touch the ball valve
connector block and avoid any contact if allergies
against the used materials are known.
3 Transport, storage and
packaging
3.1 Transport inspection
Upon receipt check delivery for any damages during
transit and completeness. Any damage must be
reported immediately upon receipt.
3.2 Storage
The ball valve connector block must only be stored
under the following conditions:
–
Do not store in open air, keep dry and free from
dust.
–
Do not expose to aggressive fluids or heat
sources.
–
Protect from direct sunlight and mechanical
agitation.
–
Storage temperature: –20 °C up to +60 °C
–
Max. relative humidity of air: 95 %
3.3 Extent of supply
WARNING
!
2 Safety notes
2.1 Correct use
Safety in operation is only guaranteed if the ball valve
connector block is used correctly.
The ball valve connector block allows the easy
connection of the dwelling station “Regudis W” to the
pipework. Any use of the ball valve connector block
outside the above application will be considered as
non-compliant and misuse. Claims of any kind
against the manufacturer and/or his authorised
representatives, regarding damages caused by
incorrect use cannot be accepted.
The observance of the installation and operating
instructions is part of the compliance terms.
2.2 Possible dangers at the installation location
and during transport
The case of an external fire was not taken into
consideration when constructing the ball valve
connector block.
Illustr. 3.1 “Regudis W” connection set
Position
Designation
Qty.
1
Ball valve connector block
1
2
Ball valve (red)
2
3
Ball valve (blue)
3
4
Locking spring
7
5
Protection cap
7
6
Accessories for wall attachment
1
7
Adhesive label
1
8
Flypass flushing device
1
Accessories for wall attachment:
2x Hexagon head screw M6x60
2x Washer
2x Dowel
3.4 Packaging
Packaging material is to be disposed of
environmentally friendly.
