12
2)
Si la température ambiante tombe en dessous de 5°C avec
le mode hors gel activé et le thermostat d’ambiance désactivé,
le thermostat est activé automatiquement (vitesse du
ventilateur: rapide) et « Auto » est affiché. La température
ambiante est alors augmentée à 7°C et le thermostat est
désactivé automatiquement après.
Autres réglages de base
Désactiver le thermostat en pressant la touche
. Presser la touche « FAN »
pendant plus de 10 secondes pour accéder
davantage de réglages de base. Basculer entre
les différents paramètres à l’aide de la touche
. Le réglage des paramètres se fait à l’aide
des touches
et
.
Paramètre
Réglage
Réglage de base
1) Activation du ventilateur
après avoir atteint la
température de
consigne
00: Ventilateur est
désactivé
01: Ventilateur continu
de tourner en service
« lente »
01
2) Système 2/4 tubes
03: Système 2 tubes
04: Système 4 tubes
03
3) Calibrage de la
température
3)
Valeur réelle ± 5 °C
3)
A n’effectuer que si la température affichée n’est pas correcte!
8
Entretien
Le thermostat d’ambiance ne doit être nettoyé qu’à l’aide d’un
détergent doux. Les détergents ne doivent pas pénétrer dans le
thermostat. Ne pas vaporiser sur le thermostat mais seulement sur un
chiffon.
9
Garantie
Les conditions de garantie valables au moment de la livraison sont à
appliquer.