OPERATION
Form No. OVm360m-0115
8
General
Use the following information and procedures to operate an
Ovention
®
matchbox
®
360 oven.
Read all safety messages in the IMPORTANT SAFETy
INFORMATION section before operating this equipment.
In the event of emergency, unplug unit (Model M360-12) or
turn OFF Main Disconnect switch (Model M360-14).
BURN hAzARD: Some exterior surfaces on unit will get
hot. Avoid unnecessary contact with unit.
Use caution and be aware of pinch points when turntable
is moving.
Menu Item Information
matchbox 360 ovens are designed to provide unequaled
flexibility and efficiency. Each oven has the capability of storing
1024 custom menu items. menu items can be organized into
Categories that group together similar items, such as different
varieties of pizza. a total of 128 Categories can be created, with
each Category able to contain 128 specific menu items. all
Categories and/or menu items appear on the main Recipes
screen.
NOTE: It is not necessary to use Categories. The oven can be
set up using specific menu items only.
at initial startup, the main Recipes screen will show either
sample menu items or customer-specific, preloaded menu
items. If the main Recipes screen shows sample menu items,
these menu items can be used to help develop specific menu
items appropriate for the installation. Refer to the “Programming
menu Items” procedure in this section for instructions on
creating menu items.
Startup
1. On model m360-14, make sure the main Disconnect switch
is in the ON (I) position.
2. move the Standby switch up to the “On” position.
• The touchscreen will energize and show the name of
the oven and current software version for a few
seconds.
Startup Screen
WARNING
CAUTION
• after the Startup Screen, the Select Oven Temperature
screen appears. Three pre-set setpoint temperatures
are available on the screen.
Startup Screen
3. Touch the desired setpoint temperature on the
touchscreen.
• The oven heaters, air blowers, and cooling fans will start
up and the turntable rotates. allow 10–15 minutes for
the oven to reach setpoint temperature.
• The touchscreen shows the selected setpoint
temperature and the current cavity temperature.
• The mini-display shows the estimated time remaining to
reach setpoint temperature.
Preheat Screen
When the oven reaches setpoint temperature, the oven begins
a temperature stabilizing period (a countdown screen appears).
Oven Stabilizing Screen
Touch to return to Select Oven
Temperature Screen and select
a different setpoint temperature.
Mini-display shows estimated time
remaining to reach setpoint temperature.
Dinner
Ready
Touch OPEN
key to rotate
turntable.
Touch desired
setpoint temperature.
Summary of Contents for Matchbox 360
Page 19: ...Form No OVm360m 0115 19 NOTES...
