IMPORTANT SAFETy INFORMATION
Form No. OVm360m-0115
4
All Models
Ovention
®
matchbox
®
360 ovens are designed to provide
unequaled flexibility in both kitchen and front-of-the-house
installations. The variety of menu options, small footprint, low
heat escape, and hood-less installation make the matchbox 360
oven a single solution alternative to multiple pieces of cooking
equipment.
Each matchbox 360 oven is equipped with dedicated upper and
lower heating elements and air blowers. The air blowers direct
heated air through upper and lower jet plates inside the oven
chamber, above and below the food. a turntable consisting of
two separate cooking surfaces rotates the cooking surfaces
between the staging platform and oven chamber through the
use of a drive motor and gear wheel. When one cooking surface
is in the oven chamber, the other is on the outside awaiting the
next food item.
Operator controls consist of a touchscreen, two control keys, a
Standby switch, and a main Disconnect switch (model m360-14
only). a USB port allows the uploading of pre-programmed
menu items, installation of software updates, and opportunity
for service diagnostics. a 6′ (1829 mm) cord and plug set is
standard.
Touchscreen
Oven Chamber
USB Port
Cooking Rack
Staging Platform
Turntable Assembly
Oven Door
Door Latch
Main Disconnect
Switch (on side)
Standby Switch
MODEL DESCRIPTION
Allow a minimum clearance of 1″ (25 mm) along the sides
and rear of unit for proper ventilation. Do not block or
cover any cabinet venting.
Do not cover racks or any other part of oven with metal foil.
Airflow restriction will cause oven to overheat.
Do not lay unit on front or back side. Damage to unit could
occur.
NOTICE
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring its
appearance and making it susceptible to soil accumulation.
Clean unit daily to avoid malfunctions and maintain
sanitary operation.
NOTICE
model Description (model m360-14 shown)
Summary of Contents for Matchbox 360
Page 19: ...Form No OVm360m 0115 19 NOTES...
