background image

LIMITED WARRANTy

Form No. OVm360m-0115

18

1. PRODUCT WARRANTy

Ovention

®

,  Inc.  (“Ovention”)  warrants  the  products  that  it

manufactures  (the  “Products”)  to  be  free  from  defects  in

materials and workmanship, under normal use and service, for

a  period  of  one  (1)  year  from  the  date  of  purchase  when

installed and maintained in accordance with Ovention’s written

instructions  or  18  months  from  the  date  of  shipment  from

Ovention. Buyer must establish the product’s purchase date

with  Ovention  sales  representative  or  by  other  means

satisfactory to Ovention in its sole discretion.
Ovention warrants the following Product components to be free

from defects in materials and workmanship from the date of

purchase (subject to the foregoing conditions) for the period(s)

of time and on the conditions listed below:

• Ninety (90) Day Parts-Only Warranty: 

Replacement Parts

THE FOREGOING WaRRaNTIES aRE EXCLUSIVE aND IN

LIEU  OF  aNy  OTHER  WaRRaNTy,  EXPRESSED  OR

ImPLIED, INCLUDING BUT NOT LImITED TO aNy ImPLIED

WaRRaNTy OF mERCHaNTaBILITy OR FITNESS FOR a

PaRTICULaR  PURPOSE  OR  PaTENT  OR  OTHER

INTELLECTUaL  PROPERTy  RIGHT  INFRINGEmENT.

Without  limiting  the  generality  of  the  foregoing,  SUCH

WaRRaNTIES DO NOT COVER: Damage to touchscreens

from  abuse  or  impact;  Wear  items  such  as  air  filters  and

conveyor belts; Damage to catalyst from use of non-approved

cleaning  products;  Product  misuse,  tampering  or

misapplication;  improper  installation;  lack  of  or  improper

cleaning; or application of improper voltage.

2. LIMITATION OF REMEDIES AND DAMAGES

Ovention’s liability and Buyer’s exclusive remedy hereunder will

be limited solely, at Ovention’s option, to repair or replacement

by an Ovention-authorized service agency (other than where

Buyer is located outside of the United States, Canada, United

kingdom or australia, in which case Ovention’s liability and

Buyer’s exclusive remedy hereunder will be limited solely to

replacement of part under warranty) with respect to any claim

made within the applicable warranty period referred to above.

Ovention reserves the right to accept or reject any such claim

in whole or part. Ovention will not accept the return of any

Product without prior written approval from Ovention, and all

approved  returns  shall  be  made  at  Buyer’s  sole  expense.

OVENTION  WILL  NOT  BE  LIaBLE,  UNDER  aNy

CIRCUmSTaNCES, FOR CONSEQUENTIaL OR INCIDENTaL

DamaGES,  INCLUDING  BUT  NOT  LImITED  TO  LaBOR

COSTS OR LOST PROFITS RESULTING FROm THE USE OF

OR  INaBILITy TO  USE THE  PRODUCTS  OR  FROm THE

PRODUCTS BEING INCORPORaTED IN OR BECOmING a

COmPONENT OF aNy OTHER PRODUCT OR GOODS.

Summary of Contents for Matchbox 360





















Reviews: