3.11
Set Active Keyes
Allows “MENU”, “REC” , “DVD” and “STBY” front panel keys to be disabled when the
rear panel configuration switch “B” is set to ON. See Section 4.2 for more information
about the rear panel configuration switch.
Set Active Keys
===================
Up: Fwd On
Dwn Mnu Rec Dvd Stby
By default, the “MENU” key is disabled when the rear panel switch is set to ON.
3.12
Set Fault Enables
Selects the parameters that will cause the front panel fault LED and rear panel fault
output to become active.
Set fault Enables
===================
Cold LoPw Full ----
Sysm
Cold:
The internal temperature is below +5C.
LoPw:
The input voltage is below 10V DC.
Full:
The internal hard disk is full.
Sysm:
A system fault has been detected (cannot be disabled)